You’ll need to find the best fume extractor in order to weld and solder safely and effectively. Whether you are an amateur welder or are very experienced with soldering, these machines offer great air filters, high CFM, mobile use and great bargains.

Comparison Table

What is the Best Fume Extractor?

Whether you are looking for a fume extractor for your personal garage or the factory you oversee, finding the best fume extractor is a critical part of ensuring a safe and efficient work environment. When you are welding or using industrial equipment, fume extractors are a necessary part of your operation. Here is a complete guide to choosing the best fume extractor for your needs, as well as information about fume extractors. You will also find some common features to compare between different extractors. Although the general function of most extractors is the same, there is a wide variety of sizes available depending on your project or operation. This guide will focus on portal, personal fume extractors for soldering and small applications as well as mid-range welding fume extractors, rather than large, industrial models.

What is a Fume Extractor?

A fume extractor is a specialized piece of equipment used to remove harmful gases and particles from the air. These fumes are generated from a variety of industrial and small-scale processes, including welding and soldering. If you or your plant perform these processes, it’s a good idea to use a fume extractor. It works similar to the hood above your oven. A fan draws the fumes away from the user. Some fume extractors use filters, while others simply divert the fumes. Whichever method you use, be sure to research the technique thoroughly. There is a more in-depth look at filters below in the buyer’s guide.

How are They Rated?

Each fume extractor is given a rating between 1 and 5. This rating is drawn from a number of different sources, including professional reviews, customer reviews, price, effectiveness and variety of uses. Then, the pros and cons of various features will be discussed as you choose the best fume extractor for your needs.

Top Small Fume Extractors

These fume extractors are primarily designed for soldering, but with some creativity you may find some other small applications for which they would be useful. These extractors are not meant to absorb the smoke and fumes of a TIG or MIG welder. That list will be covered later.

Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator...

Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator...
  • The Powerful Remove Fume Extrator and handy carry
  • Sturdy Aluminium alloy material
  • Long-lasting working time for over 50,000 hours

As a smoke absorber may indicate, this extractor uses both an exhaust fan and a carbon filter to clean and remove the hazardous fumes. This benchtop model is designed primarily for soldering and is adjustable. It’s a very reasonable price for a basic model. It has a maximum air flow of 1,000 L/min and an inlet concentration of 2 mg/L. It’s a great start for someone who is soldering at a stationary workbench, but it is not as effective as some of the other extractors. If you are soldering extensively, this may not be the extractor for you. 

Rating:

Weller WSA350-VP Benchtop Smoke Absorber Fume Extractor, 120 Volt,...

Weller WSA350-VP Benchtop Smoke Absorber Fume Extractor, 120 Volt,...
  • Voltage: 120 VAC, sound level: 45-50 dB and air consumption: 87-107 CFM
  • ESD safe, power consumption: 20 W and UL / CUL listed
  • Absorption capacity: 1.25 cubic meters to 1.37 cubic meter per minute

Using carbon-activated filters, this soldering model is designed to eliminate flux fumes from the air. It has a quiet fan that makes detailed soldering much more peaceful. It’s a bit more expensive than its competition. It has a limited range of use, and customers didn’t like how often it was necessary to replace the filter. This is a good beginner model if you are using flux fumes.

Rating:

Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber...

Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber...
  • The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for...
  • Sturdy Aluminium alloy material and long-lasting working time.
  • Super easy to set up and easy to replace filter.

This durable fume extractor is placed on the end of a robot-like arm, giving it a great deal of flexibility. Unlike benchtop models, this extractor doesn’t take up valuable space on your workbench, but instead clamps on the edge of your bench or table. It has a maximum air flow of 2,000 ml/min. It’s designed to be quiet, convenient and effective. It uses an activated carbon filter as well. The filter is not as efficient as competitive models, and some customers felt the fan was a bit underpowered. This fume absorber is a great addition to any small workbench. 

Rating:

YaeTek 60W 110V Electric Soldering Iron Kit, Adjustable Temperature...

Another great benchtop model, the YaeTek 1000 L delivers a quiet, effective fan using activated carbon filters. As the name suggests, it has a maximum air flow of 1,000 L/min, and the inlet concentration is 2 mg/L. It is nearly identical to the Flexzion model but at a slightly cheaper price of only $25. This model doesn’t feature as high of customer reviews, which point to its less-than-quality design and the amount of replacement filters needed for extensive use. 

Rating:

Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator...

Kulannder Handy Carry Solder Smoker Absorber Remover Fume Extrator...
  • The Powerful Remove Fume Extrator and handy carry
  • Sturdy Aluminium alloy material
  • Long-lasting working time for over 50,000 hours

At $26, this extractor is designed to be portable, efficient and cost-effective. It’s made with durable aluminum alloy and has a convenient filter to replace. The maximum air flow is 2,000 ml/min. It’s not designed to run continuously over long periods of time, however. While the fan has a good air flow, it requires you to position it at least 20 centimeters away from the solder point. 

Rating:

Xytronic 426DLX Fume Extractor

Xytronic 426DLX Fume Extractor
  • Wattage 20-22W
  • Max. air volume 95/115 CFM
  • Filter size 130 mm2

The Xytronic 426DLX offers a great mid-range model for more extensive soldering uses. It comes with replacement filters and is able to clear both lead fumes and flux fumes. It has a brushless fan design, which allows it to run much more quietly than you would expect. This extractor doesn’t have a lot of flexibility and must be positioned close to your project.

Rating:

No products found.

No products found.

One of the highest rated benchtop extractors, this model features much more airflow than similar-sized machines. It offers top-of-the line performance for any soldering needs. This fume extractor can be used either laying down or standing up, giving you a good range of flexibility in your workspace. It is more expensive than most benchtop models. This is good for soldering and other small projects.

Rating:

No products found.

No products found.

A much larger machine, this fume extractor isn’t a benchtop model, but instead uses hoses and vents to allow a much larger fan to extract fumes from your work area. It is still very quiet for its size and can remove smoke and fumes from a much larger space. It’s a great choice if you are doing lots of soldering. You will need to purchase hoses as well, so make sure you measure the distance between the extractor location and your workspace. Some customers purchased hoses that were far too short. This extractor has four speeds and an activated carbon HEPA filter. 

Rating:

Top Welding Fume Extractors

If you are a welder, you will need something with much greater power than a benchtop extractor. Welding produces far more smoke and harmful fumes than soldering does. To keep a safe workspace at home and on the job, here are the best welding fume extractors.

VentBoss S124/G124 Portable Weld Fume Extractor w/ (2) 6" x 14' Fume...

VentBoss S124/G124 Portable Weld Fume Extractor w/ (2) 6" x 14' Fume...
  • Applications: Manual Welding (MIG/GMAW/Stick Welding)
  • Includes two (2) 6-inch by 14-foot Fume Arm
  • Input Power: 110V, Single Phase, 20 Amps

The least mobile of the options for welding applications, the Place-A-Vent kit offers a 10-inch hood and exhaust vent capable of clearing the fumes for welding. This machine has a one-year warranty, and is inexpensive compared to other welding units. This is a great choice if you are looking for a bargain and have a stationary workplace. 

Rating:

VentBoss S110/G110 Portable Weld Fume Extractor w/ (1) 6" x 10' Fume...

VentBoss S110/G110 Portable Weld Fume Extractor w/ (1) 6" x 10' Fume...
  • Applications: Manual Welding (MIG/GMAW/Stick Welding)
  • Includes one (1) 6-inch by 10-foot Fume Arm
  • Built-in spark arrestance

At 224 pounds, “mobile” may not be the first word you think of when you see this MobileGo extractor. However, the wheels and adjustable arm do allow you a range of flexibility around your work station. It is designed to be used with two or fewer coils of solid wire per month, using its replaceable filters. This machine has a 10-foot-long arm option. This is a great starting cost for a durable and effective welding fume extractor. 

Rating:

150 cfm VentBoss S130/G130 Portable Weld Fume Extractor w/ 2" x 16'...

A true mobile extractor, this unit weighs only 50 pounds and offers a 16-foot flexible hose. The extractor also has wheels, making it exceptionally flexible. This 2.3-horsepower high vacuum can be used for any welding project. The fan has an airflow capacity of 150 CFM. It includes an attachment for dust collection, and you can purchase additional hood types for specialized uses. It doesn’t have quite the power of a larger machine, but for light and medium uses, this fume extractor is an excellent choice.

Rating:

No products found.

No products found.

A far more heavy-duty extractor, this vacuum provides 736 CFM airflow capacity. It has a 13-foot adjustable arm, making it impressively flexible for such a large extractor. This model works great for extensive welding applications. If you are looking for an extractor in your garage, or if you only weld occasionally, this machine is far too expensive for your use. This is a good mid-range priced welding extractor.

Rating:

VentBoss S122 Portable Weld Fume Extractor w/ (1) FlexDraft Attachment...

VentBoss S122 Portable Weld Fume Extractor w/ (1) FlexDraft Attachment...
  • Applications: Manual Welding (MIG/GMAW/Stick Welding), cutting, grinding
  • Includes FlexDraft Attachment and Curtain
  • Input Power: 110V, Single Phase, 20 Amps

This unique machine offers a tabletop workstation. Rather than an exhaust hood, the fan works by pulling the fumes in a downdraft. There is a steel grate capable of holding 300 pounds. It’s a durable, convenient choice if you have one welder and don’t need a mobile operation. Its 1,280 CFM is incredibly powerful and efficient. However, at 420 pounds, it is very difficult to move it. It’s also less versatile if you have multiple welders using the same extractor. At $8,725, it’s very expensive for limited applications. However, as a specialized fume extractor, it can be very convenient if you have a single, fixed welder and a fixed workstation. 

Rating:

VentBoss S123/G123 Portable Weld Fume Extractor w/ (1) 8" x 14' Fume...

VentBoss S123/G123 Portable Weld Fume Extractor w/ (1) 8" x 14' Fume...
  • Applications: Manual Welding (MIG/GMAW/Stick Welding)
  • Includes one (1) 8-inch by 14-foot Fume Arm
  • Input Power: 110V, Single Phase, 20 Amps

If you’re looking for top-of-the line filtration in a conveniently portable machine, the S123 is one of the best fume extractors on the market. It provides a massive 1,200 CFM for its size, and has a 14-foot adjustable arm. While the extractor still weighs 440 pounds, its wheels and flexible arm give it the flexibility you need. It’s great for heavy-duty welding applications, particularly for experienced welders. It is, however, the most expensive unit on the list. You should be sure that none of the other welders can deliver the results you need at a lower price. However, it has an unmatched airflow capacity and mobility.

Rating:

Buyer’s Guide

Now that you have carefully compared each welder on the list, you will want to take a minute to think about the type of fume extractor you are looking for. Finding the best machine to suit your needs involves answering a few questions:

a welder using a fume extractor

Soldering or Welding?

Obviously, soldering is going to emit a great deal less fumes and debris than welding. A fume extractor designed specifically for welding will be far too expensive to be a practical option for your soldering needs. Although the basic design remains the same, be sure to choose a fume extractor that is designed for your work.

Mobile or Stationary?

Do you have multiple welders and work benches, or will you always work in one area? Many stationary units are far less expensive, and sometimes more powerful, than their mobile competitors. If, however, you need to adjust your workplace, stationary units can become very impractical and bulky. Think about the types of materials you will be using, and decide whether it is practical to have a stationary unit. Otherwise, look for fume extractors that are mobile, adjustable or have a flexible arm.

Find The Best Choice

Choosing the best fume extractor is simple and straightforward once you answer these questions. After viewing this list, you should be able to find the best choice for you to solder or weld safely and efficiently. You will also have a better understanding of how these extractors work, and know the importance of always using one.